SPAWN MASTER LIST: Series 10 (MANGA Series 2)

For maximum results, please re-size your browser to its MAXIMUM width!

<---You should be able to fit the text of this line onto ONE line! If you cannot, your browser may need manual adjustment to attain the correct size.--->
Click HERE for Sizing Help

(The Series 10 Card Logo has not yet been edited for use! Series 2 logo is pictured above)

Click to Return to the Master List Homepage:

Series 10 Action Figures
Assortment Number: 11130

The Spawn Logo color change from the Series 9 Purple Color to the Series 10 Dark Red Color, and a New, Glass Tile-type Texture depicting the SPAWN Logo on the card back are the main differences between the Series 9 and Series 10 figure cards. The word “MANGA” is still above the main word “SPAWN,” like the Series 9 cards, except both words are a gradient Yellow-Green color surrounded by a deep Red outline. There is a small number “2” to the upper right of the main word “SPAWN.” The card is Dark Green at the top that shifts to a very light Yellow-Green at the bottom. The texturing inside the word “SPAWN” has changed from circles connected with 4 spokes to circles connected with 3 spokes and a line. The bubble is still in a Rectangular shape and is similar to the Series 9 bubbles, except a flat half circle has been smoothed out on the top of the bubbles for the Series 10 Information Stickers.

Series 10 is also known as Manga Series 2. The figures took on an appearance similar to the Japanese Manga comic book style, and they compliment Series 9. The SPAWN mythos of Series 9 was continued in the Bio Cards of the figures, making MANGA SAMURAI SPAWN a fighter for the great house of Fujiwara in the alternate universe of Kuroshio. His primary mission is to defy the Temple of Darkness, whom MANGA CYBER-VIOLATOR represents in this setting.

Information stickers appear on the top of the bubble-packs, and they are not easily visible when viewing the front of the figure. They are Green in color with dark Red vertical stripes and Yellow letters.

All peg-hole die-cuts on the Series 10 cards are round.

When an accessory or sticker is referred to as being on the left or right side of a bubble pack, the reference point is from the perspective of looking directly at the front of an unopened figure.

The Assortment and Master Numbers for each figure can be found on the front lower right hand side of the card.

The words "Series 10" are found on the front lower left hand side of the card, which denotes the figure as a member of Series 10.

Each figure has a Two-Letter Identification Code and the Figure’s Name that can be used to browse the figures easily while they are hanging on pegs. The Two-Letter code can be found on the front upper right-hand side of the card, below the series letter identification "M." The Figure’s Names can be found in the lower right-hand corner of the cards. Series 10 was the FOURTH group of SPAWN Ultra-Action Figures that used this type of coding.

Spawn_chainbar

THIS LIST WILL BE FORMATTED IN THE FOLLOWING MANNER:

NAME OF FIGURE

Special Comments on the Figure will be located here.

You can click on this space to skip to the next figure on the List.

Edition Number	Description of Variation	Two Letter ID Code	Assortment Number	Master Number	Item Number	Card Logo
Release Date	Figure “Firsts”

RUMORED VARIATIONS I HAVE NOT SEEN:

NAME OF FIGURE in bold, varying typeface.

Edition Number in bold type and Description of Variation in regular type.
McFarlane Toys Two-Letter Identification Code in bold type.
McFarlane Toys Assortment and Master Number in bold type.

McFarlane Toys Item Number in bold type:
On the Series 10 cards, this 5-digit number is located in the numeric UPC code on the back of the figure.
The Item Numbers do not appear anywhere else on the cards.

Which Corporate Logo appears on the Card: McFarlane Toys (MCF).
Just an "MCF" will be used in bold print since ALL of the Series 10 figures have the McFarlane Toys logo.

Release Date in regular type:
Approximate month and year the figure was released in the United States of America.

Figure “Firsts” in regular type:
Special Attributes about a particular variant that make it a milestone in the SPAWN Action Figure toy line.
Exclusive Figures will have the name of the outlet where they may have been purchased from and the approximate quantities that were released to the general public in this field.

RUMORED VARIATIONS I HAVE NOT SEEN: in bold type, followed by the Description of the Possible Variant.
These figures are ones I have either heard of OR read about, but I have never PHYSICALLY SEEN them! They may exist, but I have no physical proof. (i.e. A commercially released MANGA DEAD SPAWN with Red Armour).
If there are no rumored variants, then this section will be removed and not appear under the list of the other variants.

HERE IS AN EXAMPLE OF A LIST ENTRY:

MANGA DEAD SPAWN

A trophy rack, a sword and several poseable blades make MANGA DEAD SPAWN formidable. The figure has a two-sided head, with one side being a Mask with two eye holes and the other side being a Skull face. A mask can also be placed over the Skull face, if desired.

NEXT FIGURE

1st Edition	Gray armour with Gold highlights. Silver, “blood-covered” Blades with Gold highlights. Mask for Skull face is packed in a bubble indentation below the figures’ left (chainsaw) arm.	DS	11130	0001	11131	MCF
Released: June 1998

RUMORED VARIATIONS I HAVE NOT SEEN: Etc, etc.

And now, without further ado, the
Spawn_Word_Logo_MID

Series 10 Action Figure List

Spawn_Chainbar

MANGA DEAD SPAWN

A trophy rack, a sword and several poseable blades make MANGA DEAD SPAWN formidable. The figure has a two-sided head, with one side being a Masked Face with two eye holes and the other side being a Skull face. A mask can also be placed over the Skull face, if desired.

NEXT FIGURE

1st Edition	Gray armour with Gold highlights. Silver, “blood-covered” Blades with Gold highlights. Masked Face visible. A small, Gray Mask for the Skull face is packed in a bubble indentation below the figures’ left (chainsaw) arm.	DS	11130	0001	11131	MCF
Released: Early June 1998

2nd Edition	Gray armour with Gold highlights. Silver, “blood-covered” Blades with Gold highlights. Skull Face visible with NO mask on. A small, Gray Mask for the Skull face is packed in a bubble indentation below the figures’ left (chainsaw) arm.	DS	11130	0001	11131	MCF
Released: Mid-June 1998

3rd Edition	Gray armour with Gold highlights. Silver, “blood-covered” Blades with Gold highlights. Masked Face visible. A small, Gray Mask for the Skull face is packed with it placed on the Skull face. The indentation for the small Gray mask has been removed from under the tip of the figures’ left (chainsaw) arm.	DS	11130	0001	11131	MCF
Released: Late June 1998

MANGA OVERTKILL

MANGA OVERTKILL featured a fist that could be launched from his left arm. A bellows for water storage was also included, and could be attached to his back.

NEXT FIGURE

1st Edition	Light Blue Armour with Dark Blue and Black highlights. Red, “Blood-smeared” Paint on Chest with Silver accents. Cyber-type Mask on head with round Red Left eye.	OK	11130	0001	11132	MCF
Released: June 1998	MANGA OVERTKILL was the SECOND McFarlane Toys SPAWN Action Figure to have an Accessory that shoots Water.

2nd Edition	Light Blue Armour with Dark Blue and Black highlights. Red Detailing Ink on Chest with Silver accents. Cyber-type Mask on head with round Red Left eye.	OK	11130	0001	11132	MCF
Released: July 1998	MANGA OVERTKILL was the SECOND McFarlane Toys SPAWN Action Figure to have an Accessory that shoots Water.

3rd Edition	Light Blue Armour with Dark Blue and Black highlights. Red Detailing Ink on Chest inside the “skin crack” lines ONLY. Left Arm has a Red Detailing Ink line that leads to the Left shoulder implant. Silver accents. Cyber-type Mask on head with round Red Left eye.	OK	11130	0001	11132	MCF
Released: Late July 1998	MANGA OVERTKILL was the SECOND McFarlane Toys SPAWN Action Figure to have an Accessory that shoots Water.

CYBER TOOTH

One of the strangest McFarlane Toys’ SPAWN Figures ever made, CYBER TOOTH can stand on all fours or on two legs. The figure has articulated claws and lower jaw, as well as a bendable tail. When the mouth on the figure is opened all the way, a Gray human face is revealed that has Red Eyes.

NEXT FIGURE

1st Edition	Purple and Silver body with Black highlights. Red eyes.	CT	11130	0001	11133	MCF
Released: June 1998

MANGA
CYBER -VIOLATOR

MANGA CYBER-VIOLATOR has over 22 points of articulation, making him the most poseable Phlebiac Brother to date.

NEXT FIGURE

1st Edition	Body is Metallic Silver in color. Yellow eyes. Blue nodule in forehead. “Blood-spattered” Silver blades. Red wires on spine. Left hand is NOT bent at the Left wrist, and the inner bubble is molded around the Left hand.	CV	11130	0001	11134	MCF
Released: June 1998

2nd Edition	Body is Metallic Silver in color. Yellow eyes. Blue nodule in forehead. “Blood-spattered” Silver blades. Red wires on spine. Left hand is bent down at the Left wrist, and the place for the Left hand has been removed from the inner bubble.	CV	11130	0001	11134	MCF
Released: July 1998

MANGA
FREAK

A large pincher claw, a circular saw, a claw whip, a small pincher claw, a blade spike and an articulated bladed claw all adorn MANGA FREAK’s 6 poseable arms!

NEXT FIGURE

1st Edition	Yellow and Brown body with Black and Silver highlights. All blades on figure are Silver. Red and Blue wiring on Claw-Whip arm. Head has Green nodule on forehead, and has light Green, dark Green, Silver and dark Red wires protruding from the top which connect to the figure’s spine. Permanent back spine decoration packed in lower right hand corner of bubble.	FK	11130	0001	11135	MCF
Released: June 1998

MANGA
SAMURAI SPAWN

MANGA SAMURAI SPAWN includes a large Lance, a “Spiney” piece
of Back Armour and a Shield. When the Shield is combined with the
Lance and Back Armour, the autonomous “Cyber-Sect” is formed.

BACK TO MENU

1st Edition	Red, Blue and Gold body. Green Eyes. Black and Silver highlights.	SS	11130	0001	11136	MCF
Released: June 1998

NUMBER OF CONFIRMED VARIATIONS IN SERIES 10: 11


Go to the Series 9 List	Go to the McFarlane Toys Spawn SERIES 10 Figure Display Page	Go to the Series 11 List

This page: http://home.pcisys.net/~warstar/spawnlst/series10/series10.htm
Last Modified: 2/16/08
Technical Problems? E-mail: PCI Systems Webmaster
Questions? E-mail: Matt Nortum
© WebStar, Inc.